Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Slotted mounting hole allows for height adjustment.
Features:
Specs:
Typically mounted upright on a boat trailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back. On kayak trailers, these brackets are mounted to the trailer's frame and support bunk boards that run across the trailer.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at the CE Smith Light Duty Galvanized Steel Vertical Bunk Bracket. Typically mounted upright on a boat trailer's crossmembers, vertical bunk brackets allow you to mount a bunk board on its skinny side and run the board from the front of the trailer to the back. On kayak trailers, these brackets are mounted to the trailer's frame and support bunk boards that run across the trailer. This light-duty, rust-resistant bracket is gonna let you mount a bunk board on its side and enable the board to pivot during loading. This is ideal for two by four or two by six bunk boards on small craft trailers. Two brackets are required per bunk board, so with this, you're only gonna get one bracket, and additional brackets are sold separately.
And the slotted mounting hole is gonna permit as much as six inches of height adjustment during insulation. So this bracket is gonna install vertically on your boat trailer's frame with a U-bolt, and this is made in the USA of 11-gauge galvanized steel that will resist rust and corrosion. By the way, galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically three millimeters to five millimeters thick, and this thick all around coating allows galvanized steel products to provide years of use without rusting or corroding, so this is going to be suitable for saltwater exposure. Let me pull out my ruler here and just go over some overall measurements here.
The overall height, we're sitting right at 12 5/8 inches tall, and the inside width, we're sitting right at an inch and 3/4 wide. And then the mounting slot dimensions, let me see if I can line this up here for you, we're gonna be sitting right at, looks like about 9 1/8 inches long, and then about half an inch wide on that slot. And then the bunk board mounting hole diameter is 7/16 of an inch. Now, check out our website here at etrailer.com if you need U-bolts, swivel brackets, or bunk boards. Well, that's gonna conclude our look today, I do hope that it was helpful for you.
Again, my name is Andy, thank you for joining me..
Average Customer Rating: 4.8 out of 5 stars (17 Customer Reviews)
Light-duty, rust-resistant bracket lets you mount a bunk board on its side and enables the board to pivot. Slotted mounting hole allows for height adjustment.Exactly what I was looking for!! Arrived earlier than expected. Thanks to George and the whole etrailer crew for a job well done!! Be safe Guys. Installed and back fishing!!!
Ridged works as it should
The trailer brackets have performed well for over one year. They are quite durable and the galvanized coating ensures that they don’t rust even in salt water. They fit right in on my EZ Loader trailer.
just the right part, found you on line after many fruitless other sites. Found your site and you had just what I needed! Will stay with your site for any future parts. Thank you for the fast delivery, and good prices.
well packaged, robust and perfect replacement fit for my older trailer. Price is hard to beat, half of what the local store wanted
This was pretty hard to find in the brick and mortar stores around my area. Time will tell how well it holds up in the salt water environment but it sure got to me fast.
Exactly what I needed. Great part and price. Very nice doing business with.. Will definitely shop here again. Thank you so much
Boyd
6/7/2015
Made changes to my boat trailer using your product Galvanized Steel Vertical Bunk Bracket . It has been a year now and your product is working great. Thanks so much.
Great quality. no rust so far (im using it on salt water)
After a year no corrosion 0 good product
Easy fix. Pricing just right as fabrication shops charge as much just ot galvanize the pieces.
I can not be more satisfied!
Great selection of parts. Search engine worked well to help me find what I needed on line. Arrive quickly. Friendly customer service.
Items were exactly what I needed and fit perfectly.
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rhett
2/25/2015
These have been working well for the past year. Used in a predominately salt water environment and have seen very little corrosion on these uprights. Recommend rinsing with fresh water after exposure to salt water just to be sure.